This paper presents a basic investigation of the power imbalance problem with regard to maximum ratio combining (MRC) array antennas for digital TV broadcast reception. First, the relationship between the decrease in the diversity gain and reduction in the received power was investigated using two-element and four-element dipole array antennas by means of a Monte Carlo simulation. The relationship between the decrease in the diversity gain and the number of branches imposed to reduce the received power was also investigated. Then, a simple method of predicting the reduction in the diversity gain under imbalanced power conditions is given using the simulation results. The objective is to determine a criterion associated with the gain reduction that allows us to achieve the required system performance. Finally, the proposed method is confirmed by analysis using a model representing a typical portable digital broadcasting TV set held with both hands that simulates the power imbalance condition.

In this paper, a method of calculating the mean channel capacity based on S-parameter of MIMO (Multiple-Input Multiple-Output) antenna is proposed. This method exploits the correlation matrix calculated from the antenna S-parameter matrix, and offers highly accurate estimates of the mean channel capacity without dependence on SNR (Signal-to-Noise Ratio). The numerical and experimental results revealed that the proposed method can calculate the channel capacity with fair accuracy independent of the number and spacing of the antenna elements if the radiation efficiency is sufficiently high.

This paper presents a spatial fading emulator for evaluating handset MIMO antennas in a cluster environment. The proposed emulator is based on Clarke's model and has the ability to control RF signals directly in spatial domain to generate an accurate radio propagation channel model, which includes both uniform and non-uniform angular power spectra (APS) in the horizontal plane. Characteristics of a propagation channel such as fading correlations, eigenvalues and MIMO channel capacities of handset antennas located in the vicinity of the emulator's ring can be evaluated. The measured results show that the fading emulator with 31 antenna probes is sufficient to evaluate fading correlation and MIMO channel capacity of handset antenna in the case of a narrow APS with the standard deviation of more than 20 degrees.

A simple method has been proposed for the measurement of the output power and phase characteristics of the 3rd-order inter-modulation distortion (IM3) components appearing in multistage power amplifiers. By adopting a unique definition of the phase for the IM3 components that is independent of the delay time caused by transmission lines and other instrument devices, it is possible to measure the phase, merely by using a vector signal analyzer. It is demonstrated that an accurate estimation of the IM3 characteristics of two-stage cascaded power amplifiers for cellular radio handheld terminals can be made by using the IM3 characteristics of the 1st and 2nd-stage amplifiers as measured by the proposed method. The results indicate that it is possible to reduce the dissipation power by 18% at 28 dBm RF output power with respect to conventional measurement methods. Further studies show that the error in the resultant vector of the estimated IM3 is less than 1 dB, when the asymmetry characteristics of the IM3 sidebands in the 2nd-stage amplifier are less than 7.3%.

In this paper, we present a weighted-polarization wearable multiple-input multiple-output (MIMO) antenna that is based on radio-frequency (RF) signal processing to realize ultra-high-speed and high-capacity mobile communications. The proposed antenna is comprised of three orthogonal dipoles, two of which can be selected according to a weight function in different usage scenarios. The weight function is determined by considering the variation in the cross-polarization power ratio (XPR) and the antenna inclination angle which depend on the radio-propagation environment and human motion. To confirm the suitability of the proposed antenna, we perform preliminary experiments to evaluate the channel capacity of a weighted-polarization wearable MIMO antenna with an arm-swinging dynamic phantom. The measured and analytical results are in good agreement, which verifies the effectiveness of the proposed antenna. We demonstrate that the proposed antenna is suitable for realizing gigabit mobile communications in future wearable MIMO applications.

A variable phase shifter using a movable waffle iron metal plate comprised of iron rods a quarter-wavelength in length is proposed. A study of the waffle iron structure was carried out and the design method for creating a structure that would achieve large phase changes, small loss, and good isolation between adjacent phase shifters is discussed. Experiments on 1-port and 2-port phase shifters operating in the 5 GHz band show that they not only have low loss characteristics but also wide phase changes. Furthermore, the application to phased array antennas using the proposed phase shifter and its principle are demonstrated.